Torque requirements of copper pin screws for lock screw models
0.8~1.1N*M
What are the wiring welding process requirements for welding models?
Stripping size 20mm+/-1mm
Strip core wire size 5mm+/-1mm
Do not damage the conductor during the stripping process
Temperature requirement 380°+/-40°
Operation time: no more than 3 seconds per point
For LP20 products, the tin wire with flux is recommended to use a diameter of 1.6mm
Torque requirements for plug assembly assembly
Internal teeth and tail 2.0~3.0N*M, nut and tail 2.0~3.0N*M
Services and Support
